Pages: [1]
Reply Reply New Topic New Poll
  Topic Name: Bottom Bracket for Custom Built Ti bike for TD on: March 24, 2015, 01:12:45 PM
kiwidave


Posts: 251


View Profile
« on: March 24, 2015, 01:12:45 PM »

I'm having a Ti 27.5 built for the TD and need some advice on what Bottom Bracket to use.

I've looked at all the old posts here and Googled this, and it seems that the consensus is to use a threaded BB (73mm BSA), with the square tapered Shimano BB's LX/XT/XTR being suggested, or Shimano UN52 BB, or Velo Orange's Grand Cru square taper BB.

It also seems the XTR is light but not long lasting, so not really a starter.

Question: Some of the above is for Q&A's going back 4 years, so what would you experienced bikepackers recommend?

Thanks,

KiwiDave



Logged

  Topic Name: Bottom Bracket for Custom Built Ti bike for TD Reply #1 on: March 24, 2015, 03:24:42 PM
Yagi


Location: Fort Collins, CO
Posts: 152


View Profile
« Reply #1 on: March 24, 2015, 03:24:42 PM »

Assuming you're going with external bearing cups, I'd go with Chris King.  I love mine - run 'em on all my bikes.  Good serviceability and a 5 year warranty - I think - never had to check it out.  Nice and quiet, too.  I think they make press fit bottom brackets, too.
Logged

  Topic Name: Bottom Bracket for Custom Built Ti bike for TD Reply #2 on: March 29, 2015, 11:08:26 PM
Flounder


Posts: 206


View Profile
« Reply #2 on: March 29, 2015, 11:08:26 PM »

BB choice is as much derived by crank choice as anything.

- Christophe Noel
Logged

  Topic Name: Bottom Bracket for Custom Built Ti bike for TD Reply #3 on: March 31, 2015, 01:18:13 AM
Area54
Moderator


Location: Daisy Hill, Brisbane Australia
Posts: 418


View Profile
« Reply #3 on: March 31, 2015, 01:18:13 AM »

BB choice is as much derived by crank choice as anything.

- Christophe Noel

What he said. What cranks you planning on running?
Logged

Amazing where riding a bike will take you...

  Topic Name: Bottom Bracket for Custom Built Ti bike for TD Reply #4 on: March 31, 2015, 06:56:44 AM
kiwidave


Posts: 251


View Profile
« Reply #4 on: March 31, 2015, 06:56:44 AM »

What cranks you planning on running?

Is was planning on XT with XT (M785) pedals. But I see there are more BB failures than crank issues, so I'm flexible on the cranks.

Thanks.

KiwiDave
Logged

  Topic Name: Bottom Bracket for Custom Built Ti bike for TD Reply #5 on: April 01, 2015, 04:25:38 PM
jeremy11


Location: Grand Junction, CO
Posts: 263


View Profile WWW
« Reply #5 on: April 01, 2015, 04:25:38 PM »

For square taper cranks, look no further than Phil Wood.  I got an older used one at a swap meet for $15 (!!!) and I've put over 13,000 miles on it (mostly bike commuting) with NO maintenance whatsoever.
Save money somewhere else on the bike - like what sticker is on your derailleur.
Logged

  Topic Name: Bottom Bracket for Custom Built Ti bike for TD Reply #6 on: April 13, 2015, 03:39:19 PM
Wingnut


Posts: 10


View Profile
« Reply #6 on: April 13, 2015, 03:39:19 PM »

I'd go with Phil Wood, be it external or square taper...
Logged
  Pages: [1]
Reply New Topic New Poll
Jump to: