Pages: [1]
Reply Reply New Topic New Poll
  Topic Name: DIY Aerobridge for Profile Design Airstryke Aerobars on: March 09, 2019, 10:56:59 AM
marpilli


Posts: 17


View Profile
« on: March 09, 2019, 10:56:59 AM »

I saw a photo of someone who mounted their bike computer in the middle of their Profile Design Airstryke aerobars.  I thought it was a great use of the empty space so I set about to do the same.

Main ingredients: 3/4" PVC pipe, 7/8 hole saw (with the drill bit removed), drill press, sandpaper, zip ties, cloth tape.

Click on any photo for a larger version...


I used the drill press and the 7/8" hole saw to cut the PVC to the proper lengths.  Sanded the edges and drilled holes at each end for zip ties.




Zip-tied it all together and wrapped with the cloth tape.




I really like how it turned out and will play with mounting lights and computer over the weekend.




Let me know if you have any questions.
Logged
  Pages: [1]
Reply New Topic New Poll
Jump to: