Bikepacking.net forums > Forums > Classifieds >  For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17"
  Pages: [1]
Reply Reply New Topic New Poll
  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" on: January 12, 2015, 09:22:41 AM
murf


Posts: 78


View Profile
« on: January 12, 2015, 09:22:41 AM »
Walt Works 29er with s&s couplers and 6" wrench . Size medium. Paragon sliding dropouts, post mount disc on the brake side and I have both geared and single speed drive side dropouts. Both sides have titanium bolts. I recently had the cable routing rerouted to run a full length housing for both the rear brake and the rear derailleur.There is a slight blemish under the new powder coat on the top tube near the head tube from where the old housing stop was. Nothing major but felt the need to mention it . Also included is a color matched salsa steel fire starter fork , with bottle cage or everything cage mounts. I'm selling just the frame and the fork, all the other parts are being moved to another frame set. I can take additional photos of specific spots, and will be more than happy to measure any tubes lengths you have questions about . Asking $800 OBO shipped to the lower 48.

https://www.dropbox.com/s/1soh7e18srulm0y/20141226_162810.jpg?dl=0
« Last Edit: January 12, 2015, 09:50:46 AM by murf » Logged

  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" Reply #1 on: January 14, 2015, 04:13:07 AM
Dad2TnR


Posts: 54


View Profile
« Reply #1 on: January 14, 2015, 04:13:07 AM »
Interested in hearing the ETT, head and seat angle measurements.  Thanks.
Logged

  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" Reply #2 on: January 14, 2015, 05:03:25 AM
murf


Posts: 78


View Profile
« Reply #2 on: January 14, 2015, 05:03:25 AM »
Heres some detailed Geo specs.
Seat tube c-t 17.75"  sta is 73deg
Head tube length is 4" and the angle is 72deg
The chainstays measured from the center of the bottom bracket adjust between 17.25"-18.25"
The effective top tube is 23"

Thanks Mike
Logged

  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" Reply #3 on: February 17, 2015, 06:56:06 AM
azcanc


Posts: 1


View Profile
« Reply #3 on: February 17, 2015, 06:56:06 AM »
hello Sir - can i get some pics sent to me please (walt works travel frame). The link does not work for a.
« Last Edit: May 30, 2015, 02:26:20 PM by azcanc » Logged

  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" Reply #4 on: February 18, 2015, 09:44:23 AM
sherpaxc


Location: Austin, TX
Posts: 577


View Profile
« Reply #4 on: February 18, 2015, 09:44:23 AM »
That is a cool bike. 
Logged

  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" Reply #5 on: February 19, 2015, 09:19:41 AM
murf


Posts: 78


View Profile
« Reply #5 on: February 19, 2015, 09:19:41 AM »
Thanks guys!!! I hadn't  had any interest in it until recently. I have someone who's  made an offer and ive accepted it. The deal is supposed to be completed tomorrow 2/20. If it falls through and you're still interested,i'll  post up.

Thanks
Logged

  Topic Name: For Sale :Walt Works 29er with s&s couplers and paragon dropouts. Med 17" Reply #6 on: February 19, 2015, 09:44:26 AM
harryonaspot


Posts: 405


View Profile
« Reply #6 on: February 19, 2015, 09:44:26 AM »
Pleaes do. My wife has expressed interest
Thanks
Logged
  Pages: [1]
Reply New Topic New Poll
Jump to: