Handlebars and Grips » Carver MyTi Handlebar
Need to give your wrists a break? The Carver Bikes MyTi Handlebar has “swept” the alt-bar market with a light, forgiving alt bar. Constructed from 1.55mm thick 3/2.5 Titanium alloy and with a 200mm wide grip area on each side that sweeps back at a 29degree angle, the MyTi lets you ride longer and harder without the pins and needles. Overall bar width is 710mm, and you can choose between 25.4mm or 31.8 mm shims.
hims.
- 3/2.5 Seamless Titanium
- 710mm wide
- 1.55mm thick
- 200mm grip area on each side
- 29 degree sweep
- 31.8 or 25.4mm alloy shims
October 30th, 2013 in
Handlebars and Grips
Jesse on 
Financial planning on 
Martin on 
Rod on 
best dark techno 2023 on 
ScottM on 
John Schilling on 
Don Hauer on
Just received these bars and they measure 690mm. I am very disappointed in this since I bought them for the extra length compared to other “mustache” bars. After just a short ride they are extremely comfortable. I will post an update once I have have some more time on them.
After getting some long days in the saddle with these bars, I have been pleasantly surprised. They are very comfortable and you do not loose any of the control a standard flat/riser bar gives you. I have not had any issues with my wrists, which was a major concern of mine. There is a considerable amount of flex in these but since I ride rigid most of the time it gives the ride a little more of a cushioned ride. The only problem I have had with these bars is that my garmin mount’s clamp was to big for the bars but it was nothing a couple layers of bar tape and a bit of rubber couldn’t handle. I would definitely recommend these bars for anyone who wants an extremely comfortable and capable bar without having to use a longer stem like with many other mustache or H-bars.